What is new is that the optimisation of the components and their arrangement has led to an even more compact system. In addition, the previously available counterclockwise rotation has been replaced by clockwise rotation. This works optimally with the cordless screwdriver.
The system is a gear pump connected in parallel, which can be easily operated with a cordless screwdriver and a 17mm socket and thus simplifies the tilting processes enormously. The required cordless screwdriver should have at least 18 V and a torque of approx. 45 Nm, depending on the load. If no cordless screwdriver is available at the moment, tipping can alternatively be carried out via the conventional hand pump. Both systems run via a pressure relief valve to protect against pressure peaks, so that "over-tipping" is impossible.
The EasyKipp option is available via the accessories for all reverse and three-way tippers without e-hydraulics with a total weight of up to 2.7 t.